Factory Automation And Controls
Differential Step/Dir and Encoder Board (pn7737)
The pn7737 Differential Step/Dir and Encoder Board allows access to the Step/Dir channels and more Encoder channels for the HiCON Integra and DSPMC motion controllers. When used along with the Drive Interface Board for Yaskawa or Maxsine motors, the 7737 allows a simple plug-and-play setup from motion controller to Yaskawa and Maxsine AC Servo Drives.
- Color-coded RJ45 plugs for Controller to Drive Step/Dir and Encoder cables.
- 4 Differential Encoder Channels
- 4 Step/Dir Output Channels
- Drive Enable and 1 General Purpose 24V NPN Outputs
- Hardware Estop and Drive Error Inputs
Connection Diagrams:
| Part # | Description | Price | Add to Order |
|---|---|---|---|
| 7737 | Differential Step/Dir and Encoder Board | $295 | Add to order |
Digital I/O Termination Board (pn 7535P & 7535N)
The I/O Termination board (pn 7535P and 7535N) provides optically isolated digital I/O. Each board has 16 input terminals and 8 output terminals. The board connects directly to the motion controller via 26pin ribbon cable. All I/Os are optically isolated and are clearly marked for quick and easy installation.
- LEDs for every I/O
- 2 Amps output current capacity
- 7535P - PNP I/O (Sourcing)
- 7535N - NPN I/O (Sinking)
- Optically Isolated Digital I/O
INPUTS:
16 Inputs, grouped as Terminal banks of 4 inputs each, with a total of 4 banks.
Input voltage range of 12 to 30 Volts DC..
OUTPUTS:
8 Outputs, grouped as two terminal banks of 4 outputs each. Output Current Capacity of 2 Amps per output, 10 to 30VDC.
Connection Diagrams:
| Part # | Description | Price | Add to Order |
|---|---|---|---|
| 7535P | 16in/8Out OptoIsolated PNP Sourcing Type I/O Board | $275 | Add to order |
| 7535N | 16in/8Out OptoIsolated NPN Sink Type I/O Board | $275 | Add to order |
Breakout Board for DSPMCv3 w/ Cable
Breakout board with easy termination points for DSPMCv3
| Part # | Description | Price | Add to Order |
|---|---|---|---|
| 7711 | Screw Terminal Board w/ Cable | $55 | Add to order |
DAC/ADC/Encoder Termination Board for MOTENC-Lite (pn7525)
The 7525 Breakout board provides terminations for Encoders, DAC, and ADC for MOTENC-Lite PCI board. The board has 4 Differential Encoder Inputs (A, B, and Index), 8 DAC Analog Outputs and 8 ADC Analog Inputs. The board connects directly to the ENC/DAC/ADC ribbon cable connectors on the MOTENC-Lite PCI board. All signals are clearly marked for quick and easy installation. A jumper setting allows power for the Encoders to be drawn from the PC or from an external source. When using PC power, the encoders are supplied 5V DC @ 1A for all four encoders.
Connection Diagram: 7525 wiring Details
| Part # | Price | Analog inputs | Analog Output | Differential Encoder Counters | Add to Order |
|---|---|---|---|---|---|
| P/N 7525 | $75 | 8 | 8 | 4 | Add to order |