CAN Bus Extender

CAN Bus Extender

Key Features

ť	Status LEDs for Network Power, Transmit Packet, Receive Packet, and Error condition.
ť	CAN 2.0 Standard and Extended Identifiers Supported
ť	DeviceNET compatible.
ť	No PC-Host required.
ť	No MAC ID assignment needed.
ť	1000 feet cable length on each side (Belden Cable 3086A or better).
ť	Less than 1 mili-second required for packet transfer from one channel to the other
ť	Powered by network.

Price List Buy Now

Product descriptions

VITAL Systems CAN Bus Extender is used to extend CAN bus length by reproducing CAN packets from one channel to the other. Packets can be have Standard (11bits) or Extended (29bits) identifiers. The architecture allows multiple Bus Extenders to be daisy chained for even longer network lengths. These modules can also be used to create branches of network without the need for the network cable to loop back. The default bus speed is set at 125 Kbps. If your system requires a different bus speed, pls specify in order notes.

CAN Bus Extender default speed is 125 kbps. Higher speeds are also available on request.

Network

The figure below shows a sample configuration of the network. Each segment can go to a maximum of 1000 feet at 125Kbps.

Specifications

Network	CAN 2.0 Standard & Extended Frames
Voltage Range	18 to 28 Vdc
Current Consumption	Network: 60 mA
Dimensions	0.9 * 2.6 * 4.5 (HWL) Inches
Enclosure	Plastic Nema-4
Thru-Put	1900 packets/second total thru-put (Full Duplex)