Digital
I/O Termination Board
(pn
7535)
|
The I/O
Termination board (pn7535) provides optically isolated digital
I/O. Each board has 16 input terminals and 8 output terminals.
The board connects directly to the I/O ribbon cable connectors
on MOTENC PCI boards as well as DSPMC/IP Ethernet controllers.
All I/Os are optically isolated and are clearly marked for
quick and easy installation.
* LEDs for every I/O
* Removeable terminal blocks.
* 2 Amps output current capacity
* Open-Drain (sinking type) outputs
* Optically Isolated Digital I/O
INPUTS:
16 Inputs, grouped as banks of 4 inputs each, with a total
of 4 banks.
Input voltage range of 10 to 30 Volts DC. Sinking Type.
OUTPUTS:
8 Outputs, grouped as two banks of 4 outputs each. Output
Current Capacity of 2 Amps per output, 10 to 30VDC.
Connection Diagram:
7535 wiring Diagram
| Part
Number |
Description |
IOTERM
p/n 7535
Price List, Buy Now
|
Digital
Inputs: 16
Digital Outputs: 8
Opto-Isolated, Pluggable Screw Terminal |
|
DAC/ADC/Encoder
Termination Board for MOTENC-100
(pn 7521)
|
The 7521 Breakout board provides
terminations for Encoders, DAC, and ADC for MOTENC-100 PCI
board. The board has 8 Differential Encoder Inputs (A, B,
and Index), 8 DAC Analog Outputs and 8 ADC Analog Inputs.
The board connects directly to the ENC/DAC/ADC ribbon cable
connectors on the MOTENC-100 PCI board. All signals are clearly
marked for quick and easy installation. A jumper setting allows
power for the Encoders to be drawn from the PC or from an
external source.When using PC power, the encoders are supplied
5V DC @ 600mA for all eight encoders.
Connection Diagram: 7521
wiring Details
| Part
Number |
Description |
ENCTERM
p/n 7521
Price List, Buy Now
|
Analog
Inputs: 8
Analog Output: 8
Differential Encoder Counters: 8 |
|
DAC/ADC/Encoder
Termination Board for MOTENC-Lite (pn7525)
|
The 7525 Breakout board provides terminations
for Encoders, DAC, and ADC for MOTENC-Lite PCI board. The
board has 4 Differential Encoder Inputs (A, B, and Index),
8 DAC Analog Outputs and 8 ADC Analog Inputs. The board connects
directly to the ENC/DAC/ADC ribbon cable connectors on the
MOTENC-Lite PCI board. All signals are clearly marked for
quick and easy installation. A jumper setting allows power
for the Encoders to be drawn from the PC or from an external
source. When using PC power, the encoders are supplied 5V
DC @ 1A for all four encoders.
Connection Diagram: 7525
wiring Details
| Part
Number |
Description |
DAC/ADC/ENC
Termination Board
p/n 7525
Price List, Buy Now
|
Analog
Inputs: 8
Analog Output: 8
Differential Encoder Counter Inputs: 4 |
|
